Plain Dished Sherman Wheels with Idlers and Spare-$11

Kit F059

M4A3E8 (Easy 8) Sherman HVSS Lower Hull-$35
Kit #F061

This Kit is Designed to Work With Any Available 1/35th scale Plastic M4A3 Hull. The Sponson Plates and Fenders are cast slightly long to allow trimming to fit kits from Tamiya, Dragon, Italeri, Heller, MP, or similar. It is designed as a direct fit for the excellent HVSS suspension kit from AFV Club (kit #35030). It can be used with the Dragon suspension or Academy's suspension with slight modification. This kit was scaled from US Ordnance Drawings.

Kit F061 Includes;

Tow Clevis Assortment (5 Styles) -$6
Kit #F060

Includes Four Sets of Various Sized C-Clevises as Used on US Built Vehicles. Includes One Set of Late War/Post War Quick Connect Tow Hooks as Used on Easy 8 Shermans, Chaffees, Pershings, and Many Post War US Built Tanks. Includes One Hook for Cables or Chains.

No. 19 British Radio Set -$15

Kit F063

• Includes All Parts for One Vehicle Equipped with The British No. 19 Set
• Includes Additional Parts for a No. 19 Command Unit
• Includes Hand Mics, Wire for Electrical Connections, and Brass Wire for Optional Protective Cage 

Ram II OP Conversion -$70

Kit F062

An Extensive Conversion for Tamiya's M4 kit 35190. Includes a Complete Upper Hull and Turret to Depict the Ram OP Tank which saw service with Canadian Artillery and Armored units in NWE. Includes Decals. The Kit Includes:

• Complete Replacement Turret With Dummy Gun and Extra Periscopes
• Complete Upper Hull With All Hatches and Fittings
• Replacement Solid Spoked Roadwheels and Idlers
• Cable Reel Assembly and Pioneerr Tools for Engine Deck
• Front Fenders with Distinctive Stowage Boxes
• Straight Return Roller Brackets for the Tamiya Suspension
• Subtle Cast Texture on Turret and Hull Parts
• Can Be used with our Riveted Lower Hull kit F093 and F024 3 Piece Transmission 

Early Low Bustle Sherman Firefly Turret -$20

Kit F064

• Accuratly Detailed Radio Box
• Early Low Bustle Turret Design with Welded Up Pistol Port
• Subtle Texture and Foundry Marks on all Cast Parts
• Single Piece Hollow Cast Muzzle Brake
• Optional Applique Plate for Turret Cheek
• Includes Lift Rings, Cupola, Loader's Hatch, and Many Additional Turret Details
• Includes Bow MG Plate, Gun Cleaning Rods, Fire Extinguishers, and Travel Lock
• A Perfect Replacement For Dragon Turrets, or Converts Tamiya's M4 to a Firely Ic
• Can be used with our kits F051, F067, F090, or F094 

HVSS Sherman Fenders (Easy 8) -$12

Kit F065

• Includes a Full Set of HVSS Sherman Fenders for Easy 8 Tanks
• Corrects the Too Wide Width of Dragon and Aber Parts
• Includes Detailed Front Fenders
• Includes Long Rear Fender Sections for M4A4 Hull M50s
• Includes Detailed Hull Side First Aid Box
• Post war Style Rear Mud Flaps are Included
• Highly Detailed Fender Braces
• Installation Guide Scaled from Ordnance Drawings   

Direct Vision M4A4 Sherman Upper and Lower Hull -$45

Kit F067

An Accurate Upper and Lower Hull for an Early Production Direct Vision Sherman M4A4. These tanks were used extensively by Commonwealth forces in Italy and NWE, by US forces in Training stateside, and were converted to Fireflys. Can be completed with many different donor kits or with our Sherman turrets and F080 Suspension set. See Our Combo Kits Page for Combinations with this hull. The kit Includes:

• F032 Early Three Piece Transmission
• F052 Idler Mounts
• Highly Detailed and Accurate Length Lower Hull
• Poseable Separate Direct Vision Doors
• Extensive Hull Detail parts Including Lift Rings, Taillights, Bow M.G., Hull Hatches, Periscopes with Covers, and Much More  

M3 Lee Solid Stamped Road Wheels w/ Idlers and Spare -$11

Kit F068

• Solid Wheel Used on Many Late Production M3 Lees
• Often Seen on Tanks in Service in North Africa
• Includes a Complete Set of 12 Highly Detailed Road Wheels
• Accurate Grease Fittings and Rivet Detail Around Rim
• Includes a Set of F044 Welded Idler Wheels and a Spare Road Wheel
• Perfect for Replacing Inaccurate Tamiya Wheels, or to Convert Academy's Lee kit 

Quick Fix for Academy's M3 Lee Suspension -$17

Kit F069

• Corrects The Too Tall Bogie Truck Assemblies in Academy's M3 Lee Kit
• Includes Just Three Parts per Bogie, Return Roller, Volute Spring, and Bogie Housing
• Using These parts Allows the Modler to have a Complete M4 Sherman Suspension as a Spare from the Academy Kit 

M3 Lee Style Suspension -$30

Kit F070

• A Complete Replacement Suspension for M3 Lee or Early Sherman
• Includes F042 Wheel Set with Idlers
• Includes F052 Idler Mounts
• Accurately Detailed M3 Bogie Housings, Volute Springs, and Return Rollers
• Includes Hull Side Mounting Plates and Hull Bottom Plates
• Perfect for Use with our F031 M4A1 DV, F093 Hull Bottom, or F094 M4 Dv Hull 

M4 105 Conversion -$70

Kit F071

An Extensive Conversion with Complete Upper Hull, Turret, Turret Interior Parts, Pioneer Tools, Hull Details, MV Products Lenses, F053 Late Transmission Cover, Track Skids, Idlers, Air Cleaners, Cable, and Hull Hatches. Shown Built using DML's M4A1 76 as a donor. Can be built with almost any Dragon or Italeri Radial Engined Sherman Kit as a Donor. Subtle Cast Texture on Turret and Gun Mantlet. A Highly Detailed and Complete Conversion Set. 

M4 Sherman 105 Turret -$30

Kit F072

• Complet Resin Replacement Turret
• Subtle Texture on all Cast Parts
• Highly Detailed Gun and Mantlet with Snaps for Foul Weather Cover
• Includes Interior Parts for Gun Breach, Recoil Guards, and Radio
• Highly Detailed All Round Vision Cupola Can be Built Workable
• Includes Complete External Turret Fitings
• A Perfect Replacement for Tamiya or Academy's 105 Sherman Turrets 

British Parts for Sherman Ib -$15

Kit F071b

• Includes Rear Turret Blanket Box
• Includes no. 19 Radio Parts
• Includes British Pattern Fire Extinguishers
• Includes British Pattern Radio Antenna Bases
• Can Be Used With our kit F071 to Build a Sherman Ib, or Perfect for Converting Dragon's Tarawa Sherman to a Commonwealth Tank 

Sherman Vision Cupola -$8

Kit F073

• Can Be Assembled Workable
• Highly Detailed with Separate Periscope and Cover
• Interior Detail of Armored Glass Blocks
• Perfect for Replacing Gimmicky Clear Parts in Various Kits 

Detail Set for AFV Club HVSS/M40 Suspension -$12

Kit F074

• Replaces Plastic and Vinyl Volute Springs in Hvss and M40 Kit
• Accurately Represents Volute Springs and Mounts
• Includes F057 HVSS Idler Mounts
• Note* Idler Mounts are not useable with M40  

US Water Cans -$12

Kit F075

• Includes 12 US Water Cans, 9 Loose, 3 in Racks
• Accurate Water Can Style Latch and Spout
• Includes Spare Handles and Spouts to Cover Any Mishaps 

Sherman Fender Assortment  -$10

Kit F076

• Includes Three Sets of Sherman Front Fenders
• Designed to Compliment the Latest Dragon Releases
• A Set to Replace the Photo-Etched Fenders in the Tarawa M4A2
• A Set to Replace the Inaccurate Fenders in the M4A1 76 Operation Cobra
• One Set to Replace the Photo-Etched parts in their M4A3E8 76 or 105
• Can Be Used on Many Additional 1/35th scale Sherman Kits 

Detail Set for Tamiya M4A3 75 (W) -$45

Kit F077

An Extensive Detail Set for Tamiya M4A3 75 Kit 35122 and 35250.

This kit includes:

• F053 Late Transmission
• F011 Sponson Fillers
• F041 Solid Road Wheels with Idlers
• F018 Pioneer Tools
• F073 Vision Cupola
• Plus Many More Hull and Turret Details including Hull Hatches, M34A1 Mantlet, Lift Rings, Taillights, Searchlight, Cable Ends, Fuel Caps, and Antenna Base
• Includes MV Products Lenses for Headlights and Searchlight 

M4A3 Big Hatch Intermediate Production Hull -$30

Kit F078

This Hull is Representative of those producded by Fisher in the Summer of 1944. The Master Pattern was Modeled by MMiR Editor Pat Stansell. The kit includes:

• Accurate Milled Fit Rings and Pads inside Front Hull Hatch Openings
• Accurate Ventilator Screen and Cover
• Accurate Shape Lifting Lugs
• Highly Detailed Engine Deck Hinges
• A Complete Set of M6 Tank Periscopes
• Rear Storage Rack
• Highly Detailed Spare Track Block Holders
• A Perfect Replacement for Tamiya or Dragon Upper Hulls, or can be used with our F054 Lower Hull and Various Turrets 

M4 Conversion for Dragon's Sherman III Kit -$15

Kit F079

• Converts Dragon's British Sherman III to an Accurate Radial Engined M4
• Includes Highly Detailed Upper Deck and Armored Intake Cover
• Includes Lower Hull Rear Plate with Exhausts and our Round Air Cleaners
• Includes Grouser Vent Covers and Armored Fuel Caps 

Early Heavy Duty VVSS Sherman Suspension -$30

Kit F080 This Suspension is commonly seen on Shermans just after the replacement of the initial M3 Lee style bogie system. It can be seen on M4s, M4A1s, M4A2s, M4A4s, and Direct Vision M4A2s and M4A4s, and M12s

• Includes a Highly Detailed Bogie Trucks and Swing Arms
• Includes Early Assymetrical Track Skid with Bolt Detail
• Includes Adjustable Idler Wheel Mounts
• Includes Solid Spoked Wheels with a Spare
• Includes our Solid Sherman Idler Wheels
  

1/48th scale US Headlights with Lenses -$3

Kit F081

• Finely Detailed US WWII Style Headlights Cast to Accept Lenses
• Includes MV Products Lenses
• A Perfect Replacement for the Many 1/48th scale Sherman kit's parts, also Tamiya's M26 Pershing and 2 1/2 ton GMC Truck 

M4A4T / Early M50 Engine Deck Conversion for Dragon Kits -$20

Kit F082

Accurately Converts Dragon M4A4 or M50 kits to a Radial Engined M4A4T or Early M50. the kit includes:

• Engine Deck with Detailed Armored Air Intake Cover
• Grouser Box Covers
• Detailed Upper Hull Rear Plate
• Lower Hull Rear Plate with Round Air Cleaners and Radial Engine Exhausts
• Adjustabe Idler Wheel Mounts 

Early VVSS Assymetrical Track Skids -$4

Kit F083

Often seen in use just after the replacement of the M3 Lee style suspensions on Shermans. Pefect for Dragon's Sherman III or Academy's M12

• Accurate Assymetrical Design and Bolt Detail
• Includes 8 Track Skids to Cover Any Mishaps
• Shown on Dragon and Academy Suspensions 

Visit our website often to see our expanding range of resin detail parts.

info@formationsmodels.com

Contact Us Today to Order!
(731) 658-1521